DIN EN853-1SN

Construction: This hose consists of an inner tube of oil synthetic rubber, single wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: one wire braids reinforcement
Cover: Hydraulic fluid and weather resistant synthetic rubber cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃- +100℃.



Structure picture

Specification:

Nominal diameter		Inside Diameter		Reinforcement Diameter		Outside Diameter	Working Pressure		TEST Pressure	Burst Pressure	Bend Radius	Weight
Nominal diameter		mm		mm		mm	Mpa max	PSI	PSI	PSI	mm	Kg/m
mm	inch	min	max	min	max	max	Mpa max	PSI	PSI	PSI	min	Kg/m
5	3/16"	4.6	5.4	*	*	*	25	3625	10875	14500	89	0.2
6	1/4"	6.2	7	10.8	11.4	13.5	22.5	3263	9788	13050	102	0.25
8	5/16"	7.7	8.5	12.5	13.1	15.4	21.5	3118	9353	12470	114	0.31
10	3/8"	9.3	10.1	14.5	15.1	17.5	18	2610	7830	10440	127	0.36
12	1/2"	12.3	13.5	17.7	18.3	20.6	16	2320	6960	9280	178	0.45
16	5/8"	15.5	16.7	21.1	21.7	24	13	1885	5655	7540	203	0.52
19	3/4"	18.6	19.8	24.6	25.4	27.7	10.5	1523	4568	6090	241	0.65
25	1"	25	26.4	32.1	32.9	35.4	8.8	1276	3828	5104	305	0.91
32	1-1/4"	31.4	33	40.8	41.6	44.1	6.3	914	2741	3654	419	1.3
38	1-1/2"	37.7	39.3	47.2	48	50.5	5	725	2175	2900	508	1.7
51	2"	50.4	52	59.9	60.7	63.2	4	580	1740	2320	635	2