SAE 100R3

Type A - Thick cover (skive type)
Type AT - Thin cover (no-skive type)
Construction: This hose consists of an inner tube of oil synthetic rubber, two wires braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistant synthetic rubber.
Reinforcement: two high tensile steel wire layers 2/w
Cover: Abrasion and weather resistant synthetic rubber
Applications: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: From-40℃ up to +100℃



Structure picture

Specification:

Nominal Diameter	Inside Diameter		Outside Diameter	Working pressure		Test Pressure	Burst Pressure	Bend- Radius	Weight
Nominal Diameter	inch	mm	mm	bar	psi	bar	bar	mm	Kg/m
6	1/4"	6.4	14.3	86	1250	173	345	76	0.16
8	5/16"	7.9	17.5	83	1200	166	331	102	0.25
10	3/8"	9.5	19.1	78	1125	155	310	102	0.28
12	1/2"	12.7	23	68	1000	138	276	127	0.41
16	5/8"	15.9	27	60	875	120	241	140	0.47
20	3/4"	19	31.8	52	750	104	207	152	0.65
25	1"	25.4	38.1	39	565	78	155	203	0.78
32	1-1/4"	31.8	44.5	26	375	52	103	254	1