DIN EN853-2SN

Construction: This hose consists of an inner tube of oil synthetic rubber, 2 wires braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: Two wire braids reinforcement.
Cover: Hydraulic fluid and weather resistant synthetic rubber cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃- +100℃.



Structure picture

Specification:

Nominal diameter		Inside Diameter		Reinforcement Diameter		Outside Diameter	Working Pressure		TEST Pressure	Burst Pressure	Min.Bend Radius	Weight
Nominal diameter		mm		mm		mm	MPa	PSI	MPa	MPa	mm	Kg/m
mm	inch	min	max	min	max	max	max	PSI	MPa	min	mm	Kg/m
5	3/16"	4.6	5.4	10.6	11.7	14.1	41.5	6018	99.6	166	90	0.3
6	1/4"	6.2	7	12.5	13.1	15.2	40	5800	96.0	160	100	0.3
8	5/16"	7.7	8.5	14.2	14.8	17.1	35	5075	84.0	140	115	0.36
10	3/8"	9.3	10.1	16.2	16.8	19.1	33	4785	79.2	132	130	0.49
12	1/2"	12.3	13.5	19.4	20	22.3	27.5	3988	66.0	110	180	0.56
16	5/8"	15.5	16.7	22.8	23.4	25.8	25	3625	60.0	100	200	0.6
19	3/4"	18.6	19.8	26.4	27.2	29.4	21.5	3118	51.6	86	240	0.83
25	1"	25	26.4	33.9	34.7	37.1	16.5	2393	39.6	66	300	1.22
31	1-1/4"	31.4	33	42.8	43.6	46.1	12.5	1813	30.0	50	420	1.91
38	1-1/2"	37.7	39.3	49.2	50	52.5	9	1305	21.6	36	500	2.17
51	2"	50.4	52	61.9	62.7	65.2	8	1160	19.2	32	630	2.74