SAE 100R10

Type A - Thick cover (skive type)
Type AT - Thin cover (no-skive type)
Construction: This hose consists of an inner tube of oil synthetic rubber, four wire spiral reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: Four wire spiral reinforcement.
Cover: Hydraulic fluid and weather resistant thermoplastic cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃~+100℃



Structure picture

Specification:

Nominal diameter		Inside Diameter		Reinforcement Diameter	Outside Diameter	Working Pressure		Proof Pressure	Burst Pressure	Min.Bend Radius
Nominal diameter		mm		mm	mm	MPa	PSI	MPa	MPa	mm
mm	inch	min	max	min	max	max	PSI	MPa	min	mm
6.3	1/4＂	7.7	8.5	19.4+-0.5	—	60.3	8744	120.6	241.2	125
10	3/8＂	9.5	10.5	22.2+-0.5	—	51.7	7497	103.4	206.8	150
12.5	1/2＂	12.7	13.5	25.9+-0.5	—	43.1	6250	86.2	172.4	200
19	3/4＂	19	19.8	32.6+-0.5	35	34.5	5003	69	138	280
25	１＂	25	26	39.4+-0.5	43.5	27.6	4002	55.2	110.4	360
31.5	１-1/4＂	32	33	46.7+-0.5	50	20.7	3002	41.4	82.8	460
38	１-1/2＂	37.7	39	5.25+-0.5	56	17.2	2494	34.4	68.8	560
51	2＂	50.4	52	65.4+-0.5	71.5	17.2	2494	34.4	68.8	710