SAE 100R9

Type A - Thick cover (skive type)
Type AT - Thin cover (no-skive type)
Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids reinforcement, and an oil and weather resistant synthetic rubber cover.
Tube: Oil resistance synthetic rubber.
Reinforcement: Four wire spiral reinforcement.
Cover: Hydraulic fluid and weather resistant thermoplastic cover.
Application: Hose range suitable to carry hydraulic fluids such as glycol, mineral oils、fuels、lubrication、emulsion、hydrocarbons etc.
Working Temperature: -40℃~+100℃



Structure picture

Specification:

Nominal Diameter		Inside Diameter		Reinforcement Diameter		Outside Diameter	Working Pressure		Proof Pressure	Burst Pressure	Min.Bend Radius	Weight
Nominal Diameter		mm		mm		mm	MPa	PSI	MPa	MPa	mm	Kg/m
mm	inch	min	max	min	max	max	max	PSI	MPa	min	mm	Kg/m
10	3/8"	9.3	10.1	17.4	18.2	20.5	31	4495	62	124	125	0.7
12.5	1/2"	12.3	13.5	20.3	21.1	23.5	27.6	4002	55.2	110.4	180	0.83
19	3/4"	18.6	19.8	27.3	28.1	30.7	20.7	3002	41.4	82.8	240	1.3
25	1"	25	26.4	35.4	36.2	39	20.7	3002	41.4	82.8	300	1.7
31.5	1-1/4"	31.4	33	44.8	45.6	49	17.2	2494	34.4	68.8	420	3.08
38	1-1/2"	37.7	39.3	50.6	51.4	—	13.8	2001	27.6	55.2	500	3.4
51	2"	50.4	52	64.6	65.4	—	13.8	2001	27.6	55.2	660	4.35